Support for M-Audio Devices
February 18, 2004
High Criteria announces support for various M-Audio components for use with the Liberty Recorder. The M-Audio components connect to the computer with a PCI card provided by M-Audio, a USB cable or a firewire cable. Supported cards include:
The Fast Track Ultra 8-XLR USB is pictured below.
The Delta 1010 is pictured below. The associated breakout box may be rack mounted.
The Delta 44 is pictured below.
The Fast Track Ultra 4-XLR USB is pictured below.
The USB MobilePre 2 channel Pre-Amp is pictured below. It facilitates 2 channel audio recording and connects to the PC with a standard USB connection.
The Octane 8-mic pre-amp or the Audio Buddy 2-mic pre-amp may be used with any of the other M-Audio products when microphones will be connected directly to the recording system.
The Octane 8 mic pre-amp is pictured below.
The Audio Buddy 2-mic pre-amp is pictured below.
M-Audio devices are supported by various versions of Windows from Windows XP and later.
While the M-Audio devices support recording in both WAV (WDM) and ASIO mode, High Criteria recommends use of ASIO mode with the Liberty Recorder.
Further information on M-Audio devices be obtained from M-Audio at www.M-Audio.com.
Please refer to the documentation that came with your M-Audio device, prior to installation. Contact High Criteria or your Liberty sales representative, if you have any questions concerning the installation.
Copyright © High Criteria Inc. 2005-2017. All Rights Reserved.